Kärnten-Netz GmbH relies on UBIK technology!

Kärnten-Netz GmbH relies on UBIK technology!

KNG-Kärnten Netz GmbH is currently investigating the use of new technologies for supporting switching operations in the medium-voltage network. For this case, Augmensys was selected by Omicron electronics GmbH and KNG-Kärnten Netz GmbH to develop a prototype.

With the aid of Augmented Reality supported software, industrial tablets and state-of-the-art data glasses, the processes, efficiency and occupational safety of the switching operations are to be further increased.

This video shows how UBIK on the Hololens supports switching operations in the training center of Kärnten Netz GmbH, Austria. Sequential tasks are guiding the user through critical procedures, while push messages are drawing the operators attention to safety-relevant incidents.

Creating checklists is now even faster with the new UBIK® Web AI Assistant

 Checklists are a key tool in industrial processes – from maintenance and commissioning to safety measures. Until now, checklists had to be created manually, which was usually very time-consuming. With the new AI assistant in UBIK® Web, we wanted to make this...

A glimpse behind the scenes: How MaTaP PRO optimises turnarounds from planning to recommissioning

  The challenge of industrial turnarounds When industrial plants undergo a turnaround, things get complex - fast. For 4 to 6 weeks, up to 1,500 people work together under immense time pressure to carry out critical maintenance and replacement tasks up to the...

3rd Place for Augmensys – Business Award from Austria´s Leading Companies

 We were honoured with the Business Award given from Austria´s Leading Companies securing third place in the Small Business category, in the beginning of October 2024. The success of the companies was measured based on economic performance over the past three...

Augmensys nominated for the Export Award Carinthia 2024

 On 25 June, the Carinthian Chamber of Commerce presented the Export Award 2024 in recognition of the outstanding commitment and achievements of local companies who have achieved remarkable success on international markets. Helmut Guggenbichler (CEO) took part in...

Maintenance 4.0 – Water treatment with UBIK in Brazil

Maintenance 4.0 – Water treatment with UBIK in Brazil

In cooperation with our partners Voith Digital Solutions and Mentore, the Brazilian company SABESP has successfully carried out a pilot project in the area of maintenance of wastewater treatment stations. Two sites in Interlagos and Pinheiros in São Paulo were selected to improve the maintenance process using UBIK.
Field staff can use UBIK to access all existing information and procedures for the best possible processing of service requests (systems, manuals, electrical diagrams, videos, assisted service and historical data) and thus increase efficiency in the execution of maintenance orders, solve current registration problems, avoid wasting time and resources and reduce failure rate.

In addition, tags were attached to electrical, hydraulic and mechanical components that support manuals for problem solving as well as inspection information, temperature and vibration measurements. Navigation to the required equipment is also possible using AR.

Both Microsoft HoloLens and Tablets are used as mobile devices.

Creating checklists is now even faster with the new UBIK® Web AI Assistant

 Checklists are a key tool in industrial processes – from maintenance and commissioning to safety measures. Until now, checklists had to be created manually, which was usually very time-consuming. With the new AI assistant in UBIK® Web, we wanted to make this...

A glimpse behind the scenes: How MaTaP PRO optimises turnarounds from planning to recommissioning

  The challenge of industrial turnarounds When industrial plants undergo a turnaround, things get complex - fast. For 4 to 6 weeks, up to 1,500 people work together under immense time pressure to carry out critical maintenance and replacement tasks up to the...

3rd Place for Augmensys – Business Award from Austria´s Leading Companies

 We were honoured with the Business Award given from Austria´s Leading Companies securing third place in the Small Business category, in the beginning of October 2024. The success of the companies was measured based on economic performance over the past three...

Augmensys nominated for the Export Award Carinthia 2024

 On 25 June, the Carinthian Chamber of Commerce presented the Export Award 2024 in recognition of the outstanding commitment and achievements of local companies who have achieved remarkable success on international markets. Helmut Guggenbichler (CEO) took part in...

UBIK with SAP-Integration – Definitely no fake news!

UBIK with SAP-Integration – Definitely no fake news!

Our latest videos demonstrate how UBIK can be utilized in a chemical production facility for conducting inspection tasks and creating notifications. The UBIK Server is connected to SAP and transfers notifications, including captured media, to SAP PM instantly.
But this connection also creates a continuous feedback loop. Work orders generated in SAP, including operations, are in turn returned to the mobile device; from there e.g. time tickets or repairs could be sent back to SAP PM until the task has been successfully completed.

This works on tablets, but also on any other devices running a UBIK Client.

This application was implemented with SAP S/4HANA in cooperation with our partner ATOS AddIT.

Watch our new Videos:

Creating checklists is now even faster with the new UBIK® Web AI Assistant

 Checklists are a key tool in industrial processes – from maintenance and commissioning to safety measures. Until now, checklists had to be created manually, which was usually very time-consuming. With the new AI assistant in UBIK® Web, we wanted to make this...

A glimpse behind the scenes: How MaTaP PRO optimises turnarounds from planning to recommissioning

  The challenge of industrial turnarounds When industrial plants undergo a turnaround, things get complex - fast. For 4 to 6 weeks, up to 1,500 people work together under immense time pressure to carry out critical maintenance and replacement tasks up to the...

3rd Place for Augmensys – Business Award from Austria´s Leading Companies

 We were honoured with the Business Award given from Austria´s Leading Companies securing third place in the Small Business category, in the beginning of October 2024. The success of the companies was measured based on economic performance over the past three...

Augmensys nominated for the Export Award Carinthia 2024

 On 25 June, the Carinthian Chamber of Commerce presented the Export Award 2024 in recognition of the outstanding commitment and achievements of local companies who have achieved remarkable success on international markets. Helmut Guggenbichler (CEO) took part in...

“Digitalschmiede” – Opening – Vinci Energies digital lab!

“Digitalschmiede” – Opening – Vinci Energies digital lab!

On the 6th of April, the so-called “Digitalschmiede” of our partner Vinci Energies opened its doors in Frankfurt, Germany. It combines a creative working place with a demo room for digital prototypes. In this innovative environment, own business units as well as start-ups will receive impetus for their digital projects. Among other cooperation partners, Augmensys is also part of this new and unique concept. Jürgen Kneidingerwas on site to witness the full operability of the UBIK®-based “Smart Maintenance” showcase, together with Frank Berger, Actemium, and Jorge Rivero Sanchez of Vinci Energies. After the ceremonial opening by Dr. Reinhard Schlemmer, Deputy Managing Director at Vinci Energies and a guided tour around the place with its wide variety of showcases, visitors could experiment and ask questions on their own. They were visibly impressed by the possibility of monitoring and controlling a fully working, small-scale demo plant through data glasses (Microsoft HoloLens) and a tablet. The kick-off event was a great success and certainly this space for digital change will continue to be successful in the future. We are looking forward to further exciting and innovative events!

Creating checklists is now even faster with the new UBIK® Web AI Assistant

 Checklists are a key tool in industrial processes – from maintenance and commissioning to safety measures. Until now, checklists had to be created manually, which was usually very time-consuming. With the new AI assistant in UBIK® Web, we wanted to make this...

A glimpse behind the scenes: How MaTaP PRO optimises turnarounds from planning to recommissioning

  The challenge of industrial turnarounds When industrial plants undergo a turnaround, things get complex - fast. For 4 to 6 weeks, up to 1,500 people work together under immense time pressure to carry out critical maintenance and replacement tasks up to the...

3rd Place for Augmensys – Business Award from Austria´s Leading Companies

 We were honoured with the Business Award given from Austria´s Leading Companies securing third place in the Small Business category, in the beginning of October 2024. The success of the companies was measured based on economic performance over the past three...

Augmensys nominated for the Export Award Carinthia 2024

 On 25 June, the Carinthian Chamber of Commerce presented the Export Award 2024 in recognition of the outstanding commitment and achievements of local companies who have achieved remarkable success on international markets. Helmut Guggenbichler (CEO) took part in...

Augmensys presents at the Digital Enterprise in Vienna: new ways to the future – Industry 4.0

Augmensys presents at the Digital Enterprise in Vienna: new ways to the future – Industry 4.0

On the 5th of May, the Digital Enterprise Conference took place at the Novomatic Center in Vienna. Numerous well-known guests discussed the issue of digitalization. Robots as daily helpers, digital mobility and artificial intelligence were just some of them.

In order to cover the area of ​​digitization in the industry-sector, our CEO Helmut Guggenbichler was invited. He explained approaches towards industry 4.0 in the context of industrial mobile solutions and demonstrated how mobile data management with Augmented Reality enables the transition from “big data” to “smart data” –  filtered, valuable data – and thus to become master of the partly worthless data flood again.

He also discussed the benefits and the possibilities of AR applications and demonstrated this live with the Microsoft HoloLens®. All in all, it was a very successful event, which showed that the paths that are used in the field of digitization are manifold and, above all, already viable.

Creating checklists is now even faster with the new UBIK® Web AI Assistant

 Checklists are a key tool in industrial processes – from maintenance and commissioning to safety measures. Until now, checklists had to be created manually, which was usually very time-consuming. With the new AI assistant in UBIK® Web, we wanted to make this...

A glimpse behind the scenes: How MaTaP PRO optimises turnarounds from planning to recommissioning

  The challenge of industrial turnarounds When industrial plants undergo a turnaround, things get complex - fast. For 4 to 6 weeks, up to 1,500 people work together under immense time pressure to carry out critical maintenance and replacement tasks up to the...

3rd Place for Augmensys – Business Award from Austria´s Leading Companies

 We were honoured with the Business Award given from Austria´s Leading Companies securing third place in the Small Business category, in the beginning of October 2024. The success of the companies was measured based on economic performance over the past three...

Augmensys nominated for the Export Award Carinthia 2024

 On 25 June, the Carinthian Chamber of Commerce presented the Export Award 2024 in recognition of the outstanding commitment and achievements of local companies who have achieved remarkable success on international markets. Helmut Guggenbichler (CEO) took part in...
Termine

3. VDI Fachkonferenz
6. – 7. September 2018, München
…Augmented und Virtual Reality als Smart Assistance

Chemical Enterprise 4.0
29. November 2017
… Digitalisierung in der Chemieindustrie

> alle Termine

Standorte
.horizontal-tab{ border:none; } .horizontal-tab .et_pb_tabs_controls { background: none; margin: auto; margin-bottom:20px; text-align: center; } .horizontal-tab .et_pb_tabs_controls:after { border:none; } .horizontal-tab .et_pb_tabs_controls li{ min-width: 1%; margin-right: 2%; display: inline-block; font-weight: semibold; float: none; text-align: center; padding: 5px 0px 5px; border:none; background-color:#ffffffc; border-radius:30px; -webkit-transition: all 0.5s ease-in-out; -moz-transition: all 0.5s ease-in-out; -o-transition: all 0.5s ease-in-out; -ms-transition: all 0.5s ease-in-out; transition: all 0.5s ease-in-out; } .horizontal-tab .et_pb_tabs_controls li:hover{ background-color:#ff8700; } .horizontal-tab .et_pb_tabs_controls li:hover a{ color:#fff !important; } .horizontal-tab .et_pb_tabs_controls li.et_pb_tab_active{ background-color:#ff7800; } .horizontal-tab .et_pb_tabs_controls li.et_pb_tab_active a{ color: #fff !important; } .horizontal-tab.et_pb_tabs .et_pb_tabs_controls li a{ text-align: center; display: inline; color: #292929; font-family:Dosis, Open Sans, Droid Sans !important; text-transform:uppercase; font-weight:semibold; font-size:14px; line-height:1em !important; -webkit-transition: all 0.5s ease-in-out; -moz-transition: all 0.5s ease-in-out; -o-transition: all 0.5s ease-in-out; -ms-transition: all 0.5s ease-in-out; transition: all 0.5s ease-in-out; } .horizontal-tab .et_pb_tabs_controls li { text-align:center; margin-bottom:20px; } .horizontal-tab .et_pb_tab h3{ color:#ffffff; text-transform:uppercase; font-weight:bold; }
USEFUL LINKS
Termine

3. VDI Fachkonferenz
6. – 7. September 2018, München
…Augmented und Virtual Reality als Smart Assistance

Chemical Enterprise 4.0
29. November 2017
… Digitalisierung in der Chemieindustrie

> alle Termine

Standorte
.horizontal-tab{ border:none; } .horizontal-tab .et_pb_tabs_controls { background: none; margin: auto; margin-bottom:20px; text-align: center; } .horizontal-tab .et_pb_tabs_controls:after { border:none; } .horizontal-tab .et_pb_tabs_controls li{ min-width: 1%; margin-right: 2%; display: inline-block; font-weight: semibold; float: none; text-align: center; padding: 5px 0px 5px; border:none; background-color:#ffffffc; border-radius:30px; -webkit-transition: all 0.5s ease-in-out; -moz-transition: all 0.5s ease-in-out; -o-transition: all 0.5s ease-in-out; -ms-transition: all 0.5s ease-in-out; transition: all 0.5s ease-in-out; } .horizontal-tab .et_pb_tabs_controls li:hover{ background-color:#ff8700; } .horizontal-tab .et_pb_tabs_controls li:hover a{ color:#fff !important; } .horizontal-tab .et_pb_tabs_controls li.et_pb_tab_active{ background-color:#ff7800; } .horizontal-tab .et_pb_tabs_controls li.et_pb_tab_active a{ color: #fff !important; } .horizontal-tab.et_pb_tabs .et_pb_tabs_controls li a{ text-align: center; display: inline; color: #292929; font-family:Dosis, Open Sans, Droid Sans !important; text-transform:uppercase; font-weight:semibold; font-size:14px; line-height:1em !important; -webkit-transition: all 0.5s ease-in-out; -moz-transition: all 0.5s ease-in-out; -o-transition: all 0.5s ease-in-out; -ms-transition: all 0.5s ease-in-out; transition: all 0.5s ease-in-out; } .horizontal-tab .et_pb_tabs_controls li { text-align:center; margin-bottom:20px; } .horizontal-tab .et_pb_tab h3{ color:#ffffff; text-transform:uppercase; font-weight:bold; }

Review: HMI 2018 – “Connect & Collaborate”

Review: HMI 2018 – “Connect & Collaborate”

210,000 visitors were counted at this year’s Hannover Messe International (HMI), which naturally delighted the more than 5,000 exhibitors from 75 nations! Under the slogan “Connect & Collaborate”, renowned leaders of the international technology industry met to discuss opportunities and challenges of digitization, and to present the latest developments in that area.

Augmensys was represented in cooperation with Vinci Energies (partner and shareholder of Augmensys). Due to Vincis strong focus on new technologies, the trade fair appearance was designed accordingly and both, Helmut Guggenbichler and Alexander Mankel, had the chance to display Augmensys at a stunning booth in a top location.

The basic concept of UBIK on a tablet was demonstrated to enthusiastic customers, but the highlight was the UBIK-HoloLens-showcase: visitors could get their hands on the wearable and experience the possibilities of the new technology in a fully working, miniature production facility right on the booth.

The fair was also a complete success in other respects. Exciting discussions led to new customer contacts and a closer cooperation with the renowned manufacturer of industrial hardware, Ecom, was also initiated.

Creating checklists is now even faster with the new UBIK® Web AI Assistant

 Checklists are a key tool in industrial processes – from maintenance and commissioning to safety measures. Until now, checklists had to be created manually, which was usually very time-consuming. With the new AI assistant in UBIK® Web, we wanted to make this...

A glimpse behind the scenes: How MaTaP PRO optimises turnarounds from planning to recommissioning

  The challenge of industrial turnarounds When industrial plants undergo a turnaround, things get complex - fast. For 4 to 6 weeks, up to 1,500 people work together under immense time pressure to carry out critical maintenance and replacement tasks up to the...

3rd Place for Augmensys – Business Award from Austria´s Leading Companies

 We were honoured with the Business Award given from Austria´s Leading Companies securing third place in the Small Business category, in the beginning of October 2024. The success of the companies was measured based on economic performance over the past three...

Augmensys nominated for the Export Award Carinthia 2024

 On 25 June, the Carinthian Chamber of Commerce presented the Export Award 2024 in recognition of the outstanding commitment and achievements of local companies who have achieved remarkable success on international markets. Helmut Guggenbichler (CEO) took part in...
Termine

3. VDI Fachkonferenz
6. – 7. September 2018, München
…Augmented und Virtual Reality als Smart Assistance

Chemical Enterprise 4.0
29. November 2017
… Digitalisierung in der Chemieindustrie

> alle Termine

Standorte
.horizontal-tab{ border:none; } .horizontal-tab .et_pb_tabs_controls { background: none; margin: auto; margin-bottom:20px; text-align: center; } .horizontal-tab .et_pb_tabs_controls:after { border:none; } .horizontal-tab .et_pb_tabs_controls li{ min-width: 1%; margin-right: 2%; display: inline-block; font-weight: semibold; float: none; text-align: center; padding: 5px 0px 5px; border:none; background-color:#ffffffc; border-radius:30px; -webkit-transition: all 0.5s ease-in-out; -moz-transition: all 0.5s ease-in-out; -o-transition: all 0.5s ease-in-out; -ms-transition: all 0.5s ease-in-out; transition: all 0.5s ease-in-out; } .horizontal-tab .et_pb_tabs_controls li:hover{ background-color:#ff8700; } .horizontal-tab .et_pb_tabs_controls li:hover a{ color:#fff !important; } .horizontal-tab .et_pb_tabs_controls li.et_pb_tab_active{ background-color:#ff7800; } .horizontal-tab .et_pb_tabs_controls li.et_pb_tab_active a{ color: #fff !important; } .horizontal-tab.et_pb_tabs .et_pb_tabs_controls li a{ text-align: center; display: inline; color: #292929; font-family:Dosis, Open Sans, Droid Sans !important; text-transform:uppercase; font-weight:semibold; font-size:14px; line-height:1em !important; -webkit-transition: all 0.5s ease-in-out; -moz-transition: all 0.5s ease-in-out; -o-transition: all 0.5s ease-in-out; -ms-transition: all 0.5s ease-in-out; transition: all 0.5s ease-in-out; } .horizontal-tab .et_pb_tabs_controls li { text-align:center; margin-bottom:20px; } .horizontal-tab .et_pb_tab h3{ color:#ffffff; text-transform:uppercase; font-weight:bold; }
USEFUL LINKS
Termine

3. VDI Fachkonferenz
6. – 7. September 2018, München
…Augmented und Virtual Reality als Smart Assistance

Chemical Enterprise 4.0
29. November 2017
… Digitalisierung in der Chemieindustrie

> alle Termine

Standorte
.horizontal-tab{ border:none; } .horizontal-tab .et_pb_tabs_controls { background: none; margin: auto; margin-bottom:20px; text-align: center; } .horizontal-tab .et_pb_tabs_controls:after { border:none; } .horizontal-tab .et_pb_tabs_controls li{ min-width: 1%; margin-right: 2%; display: inline-block; font-weight: semibold; float: none; text-align: center; padding: 5px 0px 5px; border:none; background-color:#ffffffc; border-radius:30px; -webkit-transition: all 0.5s ease-in-out; -moz-transition: all 0.5s ease-in-out; -o-transition: all 0.5s ease-in-out; -ms-transition: all 0.5s ease-in-out; transition: all 0.5s ease-in-out; } .horizontal-tab .et_pb_tabs_controls li:hover{ background-color:#ff8700; } .horizontal-tab .et_pb_tabs_controls li:hover a{ color:#fff !important; } .horizontal-tab .et_pb_tabs_controls li.et_pb_tab_active{ background-color:#ff7800; } .horizontal-tab .et_pb_tabs_controls li.et_pb_tab_active a{ color: #fff !important; } .horizontal-tab.et_pb_tabs .et_pb_tabs_controls li a{ text-align: center; display: inline; color: #292929; font-family:Dosis, Open Sans, Droid Sans !important; text-transform:uppercase; font-weight:semibold; font-size:14px; line-height:1em !important; -webkit-transition: all 0.5s ease-in-out; -moz-transition: all 0.5s ease-in-out; -o-transition: all 0.5s ease-in-out; -ms-transition: all 0.5s ease-in-out; transition: all 0.5s ease-in-out; } .horizontal-tab .et_pb_tabs_controls li { text-align:center; margin-bottom:20px; } .horizontal-tab .et_pb_tab h3{ color:#ffffff; text-transform:uppercase; font-weight:bold; }